The roll up membrane provided by FFM Inc has the following characteristics:
1. A variety of feed channels are available.
2. Long term operation is stable and lasting.
3. Excellent cleaning recoverability.
4. High voltage resistance.
5. Good resistance to chemical cleaning agents and temperature.
Application of FFM Inc roll up membrane
Fumo company has been carrying out innovative research on membrane technology and membrane application scheme for many years. The rolled membrane parts produced by Fumo company are widely used in food, beverage, milk concentration, cheese production, whey powder, whey protein, lactose production and other food production fields, and remain the benchmark products in the market. Depending on the properties of the feed solution and the total solids content, the rich film can provide different feed channels from narrow to wide. There are many kinds of diameter and length to choose from.
Specification Parameter | ||||||
Model | Water yield（gpd，m³/d） | MgSO4 | Membrane Area | inlet passage | ||
Nominal | Maximum | Minimum | Removalrate（%） | ft2 (m2) | mil（mm） | |
FFM-N2540GB-500 | 700（2.6） | 900(3.4) | 500（1.9） | ＞99.0 | 34（3.1） | 31（0.8） |
500（1.9） | 700（2.6） | 300（1.1） | ＞99.0 | 23（2.1） | 46（1.1） | |
FFM-N3838-500 | 900(3.4) | 1200(4.5) | 600(2.3) | ＞99.0 | 76（7.1） | 31（0.8） |
720(2.7) | 970(3.7) | 480(1.8) | ＞99.0 | 61（5.7） | 46（1.1） | |
FFM-N3839-500 | 900(3.4) | 1200(4.5) | 600(2.3) | ＞99.0 | 76（7.1） | 31（0.8） |
720(2.7) | 970(3.7) | 480(1.8) | ＞99.0 | 61（5.7） | 46（1.1） | |
FFM-N8038-500 | 4450(16.8) | 5600(21.2) | 3300(12.5) | ＞99.0 | 371（34.5） | 31（0.8） |
3500(13.2) | 4400(16.7) | 2740(10.4) | ＞99.0 | 291（27） | 46（1.1） | |
FFM-N8040G-500 | 6200(23.5) | 7450(28.2) | 5250(19.9) | ＞99.0 | 400（37.1） | 28（0.7） |
5275(20.0) | 6350(24.0) | 4500(17.0) | ＞99.0 | 330（30.7） | 31（0.8） | |
4500(17.0) | 5400(20.4) | 3800(14.4) | ＞99.0 | 260（24.1） | 46（1.1） | |
OPERATION PARAMETERS：（FFM-N8040G-500）
Recommended operating pressure：
200-600 psi (13.8-41.4bar)
Maximum operating pressure：
600psi (41.4bar)
Maximum operating temperature：
122°F (50℃)
Maximum cleaning temperature：
113°F (45℃)
Maximum continuous residual chlorine：
＜0.1mg/l
PH range of continuous operation：
4.0-10.0（25℃)
PH range of online cleaning:
1.7-11.5（25℃）
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
60 psi (4.2 bar)
Maximum inflow turbidity：
1NTU
Maximum influent SDI (test for 15 minutes)：
5
OPERATION PARAMETERS：（Other models）
Recommended operating pressure：
200-450 psi (13.8-31bar)
Maximum operating pressure：
650psi (44.8bar)
Operating temperature range：
40-122°F (5-50℃)
Cleaning temperature range：
95-122°F (35-50℃)
PH range of continuous operation：
4.0-10.0（25℃)
PH range of online cleaning:
1.8-11.0（25℃）
Design pressure drop of single membrane element：
6-10 psi (0.4-0.7 bar
Design pressure drop of single pressure vessel (5 in series)：
6-10 psi (0.4-0.7 bar)
The roll up membrane provided by FFM Inc has the following characteristics:
1. A variety of feed channels are available.
2. Long term operation is stable and lasting.
3. Excellent cleaning recoverability.
4. High voltage resistance.
5. Good resistance to chemical cleaning agents and temperature.
Application of FFM Inc roll up membrane
Fumo company has been carrying out innovative research on membrane technology and membrane application scheme for many years. The rolled membrane parts produced by Fumo company are widely used in food, beverage, milk concentration, cheese production, whey powder, whey protein, lactose production and other food production fields, and remain the benchmark products in the market. Depending on the properties of the feed solution and the total solids content, the rich film can provide different feed channels from narrow to wide. There are many kinds of diameter and length to choose from.
Specification Parameter | ||||||
Model | Water yield（gpd，m³/d） | MgSO4 | Membrane Area | inlet passage | ||
Nominal | Maximum | Minimum | Removalrate（%） | ft2 (m2) | mil（mm） | |
FFM-N2540GB-500 | 700（2.6） | 900(3.4) | 500（1.9） | ＞99.0 | 34（3.1） | 31（0.8） |
500（1.9） | 700（2.6） | 300（1.1） | ＞99.0 | 23（2.1） | 46（1.1） | |
FFM-N3838-500 | 900(3.4) | 1200(4.5) | 600(2.3) | ＞99.0 | 76（7.1） | 31（0.8） |
720(2.7) | 970(3.7) | 480(1.8) | ＞99.0 | 61（5.7） | 46（1.1） | |
FFM-N3839-500 | 900(3.4) | 1200(4.5) | 600(2.3) | ＞99.0 | 76（7.1） | 31（0.8） |
720(2.7) | 970(3.7) | 480(1.8) | ＞99.0 | 61（5.7） | 46（1.1） | |
FFM-N8038-500 | 4450(16.8) | 5600(21.2) | 3300(12.5) | ＞99.0 | 371（34.5） | 31（0.8） |
3500(13.2) | 4400(16.7) | 2740(10.4) | ＞99.0 | 291（27） | 46（1.1） | |
FFM-N8040G-500 | 6200(23.5) | 7450(28.2) | 5250(19.9) | ＞99.0 | 400（37.1） | 28（0.7） |
5275(20.0) | 6350(24.0) | 4500(17.0) | ＞99.0 | 330（30.7） | 31（0.8） | |
4500(17.0) | 5400(20.4) | 3800(14.4) | ＞99.0 | 260（24.1） | 46（1.1） | |
OPERATION PARAMETERS：（FFM-N8040G-500）
Recommended operating pressure：
200-600 psi (13.8-41.4bar)
Maximum operating pressure：
600psi (41.4bar)
Maximum operating temperature：
122°F (50℃)
Maximum cleaning temperature：
113°F (45℃)
Maximum continuous residual chlorine：
＜0.1mg/l
PH range of continuous operation：
4.0-10.0（25℃)
PH range of online cleaning:
1.7-11.5（25℃）
Design pressure drop of single membrane element：
10 psi (0.7 bar)
Design pressure drop of single pressure vessel：
60 psi (4.2 bar)
Maximum inflow turbidity：
1NTU
Maximum influent SDI (test for 15 minutes)：
5
OPERATION PARAMETERS：（Other models）
Recommended operating pressure：
200-450 psi (13.8-31bar)
Maximum operating pressure：
650psi (44.8bar)
Operating temperature range：
40-122°F (5-50℃)
Cleaning temperature range：
95-122°F (35-50℃)
PH range of continuous operation：
4.0-10.0（25℃)
PH range of online cleaning:
1.8-11.0（25℃）
Design pressure drop of single membrane element：
6-10 psi (0.4-0.7 bar
Design pressure drop of single pressure vessel (5 in series)：
6-10 psi (0.4-0.7 bar)
